Saturday, April 7, 2007

Agate













Agate is a term applied not to a distinct mineral species, but to an aggregate of various forms of silica, chiefly chalcedony.

According to Theophrastus, the agate (achates) was named from the river Achates, now the Drillo, in Sicily, where the stone was first found.

Most agates occur as nodules in volcanic rocks or ancient lavas where they represent cavities originally produced by the disengagement of volatiles in the molten mass which were then filled, wholly or partially, by siliceous matter deposited in regular layers upon the walls. Such agates, when cut transversely, exhibit a succession of parallel lines, often of extreme tenuity, giving a banded appearance to the section. Such stones are known as banded agate, riband agate and striped agate.

In the formation of an ordinary agate, it is probable that waters containing silica in solution -- derived, perhaps, from the decomposition of some of the silicates in the lava itself -- percolated through the rock and deposited a siliceous coating on the interior of the vapour-vesicles. Variations in the character of the solution or in the conditions of deposit may cause corresponding variation in the successive layers, so that bands of chalcedony often alternate with layers of crystalline quartz. Several vapour-vesicles may unite while the rock is viscous, and thus form a large cavity which may become the home of an agate of exceptional size; thus a Brazilian geode lined with amethyst and weighing 35 tons was exhibited at the Dusseldorf Exhibition of 1902.

The first deposit on the wall of a cavity, forming the "skin" of the agate, is generally a dark greenish mineral substance, like celadonite, delessite or "green earth," which are rich in iron probably derived from the decomposition of the augite in the enclosing volcanic rock. This green silicate may give rise by alteration to a brown iron oxide (limonite), producing a rusty appearance on the outside of the agate-nodule. The outer surface of an agate, freed from its matrix, is often pitted and rough, apparently in consequence of the removal of the original coating. The first layer spread over the wall of the cavity has been called the "priming," and upon this base zeolitic minerals may be deposited.

Ref.Wikipedia

1 comment:

Unknown said...

These are great pieces of work. I am always amazed at what some people can do with a few lengths of wire and a pair of pliers. It's truly a form of art.

I am curious as to how one of those pieces is made though. (The pendant- 9th photo down)

Since I am not a professional wire twister (nor do I aspire to be) I am not sure if it is proper to ask the following question or not, but at the risk of sounding forward, do you happen to have a photo of the reverse side of that pendant?

I am absolutely puzzled by whats happening with that wire behind the stone.

Great blog. Keep up the good work, and I look forward to seeing some new photos in the near future.